Transformateur
Utiliser cette image
Puis-je réutiliser cette image sans autorisation? Oui
Les images sur le portail de la collection d’Ingenium ont la licence Creative Commons suivante :
Copyright Ingenium / CC BY-NC-ND (Attribution-NonCommercial 4.0 International (CC BY-NC 4.0)
ATTRIBUER CETTE IMAGE
Ingenium,
1992.2885.001
Permalien:
Ingenium diffuse cette image sous le cadre de licence Creative Commons et encourage son téléchargement et sa réutilisation à des fins non commerciales. Veuillez mentionner Ingenium et citer le numéro de l’artefact.
TÉLÉCHARGER L’IMAGEACHETER CETTE IMAGE
Cette image peut être utilisée gratuitement pour des fins non commerciales.
Pour un usage commercial, veuillez consulter nos frais de reproduction et communiquer avec nous pour acheter l’image.
- TYPE D’OBJET
- 10,000 V/OUTPUT 111,900 W/150 HP/AIR COOLED
- DATE
- 1885–1891
- NUMÉRO DE L’ARTEFACT
- 1992.2885.001
- FABRICANT
- Ferranti Ltd.
- MODÈLE
- Inconnu
- EMPLACEMENT
- Hollinwood, England
Plus d’information
Renseignements généraux
- Nº de série
- 22
- Nº de partie
- 1
- Nombre total de parties
- 1
- Ou
- S/O
- Brevets
- S/O
- Description générale
- metal/ wood/ fibre
Dimensions
Remarque : Cette information reflète la taille générale pour l’entreposage et ne représente pas nécessairement les véritables dimensions de l’objet.
- Longueur
- 1,1 m
- Largeur
- 1,0 m
- Hauteur
- 1,0 m
- Épaisseur
- S/O
- Poids
- 4050,0
- Diamètre
- S/O
- Volume
- S/O
Lexique
- Groupe
- Énergie-électrique
- Catégorie
- Réglementation et transformation
- Sous-catégorie
- S/O
Fabricant
- Ou
- FERRANTI
- Pays
- England
- État/province
- Inconnu
- Ville
- Hollinwood
Contexte
- Pays
- Angleterre
- État/province
- Inconnu
- Période
- Late 19th early 20th century
- Canada
-
Sent to Ontario Hydro by Ferranti Ltd. in 1965, and became part of the Ontario Hydro Collection. Ferranti became an important manufacturer of electric equipment in Canada. - Fonction
-
A device used to transfer electric energy from one circuit to another, and which changes the voltage, current, phase or other electric characteristic. - Technique
-
One of the first transformer built by Ferranti. It was used as part of Deptford scheme at the Trafalgar Square Power Station to step down 10,000 volt supply from Deptford to 2,400 volt as used in London. This transformer consists of a high-pressure coil inter-spaced between two low-pressure coils. Each of these coils is composed of copper strips, separated by vulcanized fibre and wound over with varnished cloth and vulcanized fibre. They are formed of a number of separate flat coils built up one over the other and connected together in series, insulating material being inserted between each element. The high-pressure and low-pressure coils are separated from one another by sheets of ebonite, with a considerable air space between. The iron cores are very massive and are formed of flat bands bent over in opposite directions to form closed magnetic circuits; the various groups of iron bands being separated from one another by an air space of 0.5 inch, to provide for ventilation, or in cases where the whole transformer was placed in oil, to allow a free circulation of the oil. - Notes sur la région
-
Inconnu
Détails
- Marques
- Serial number embossed on wood and painted over in black reads: "22" (serial number is hard to see, found on a wooden side panel)
- Manque
- none known
- Fini
- Painted black
- Décoration
- S/O
FAIRE RÉFÉRENCE À CET OBJET
Si vous souhaitez publier de l’information sur cet objet de collection, veuillez indiquer ce qui suit :
Ferranti Ltd., Transformateur, entre 1885–1891, Numéro de l'artefact 1992.2885, Ingenium - Musées des sciences et de l'innovation du Canada, http://collection.ingenium.ca/fr/id/1992.2885.001/
RÉTROACTION
Envoyer une question ou un commentaire sur cet artefact.
Plus comme ceci



































































































